Mechanical & Civil Engineering
Disc Brake Stopping Distance & Heat Calculator
Calculate stopping distance, braking torque and heat dissipated by a disc brake during a stop.
Your inputs
Change any value to update the result instantly.
Stopping distance
112.36 m
Braking torque
168 N·m
Heat dissipated
578.7 kJ
Initial velocity
27.78 m/s
What this calculator does
Disc Brake Stopping Distance & Heat Calculator: Applies the standard machine-element relationship used in design textbooks so the capacity, rating or geometry can be worked out step by step.
What your result means
The headline figure is the capacity, rating or geometric result for the element you described. Compare it with the manufacturer's rating and your required service factor.
Formula and working
d = v²/(2×μ×g); T = μ×F×r; Q = ½mv²
- 1
Collect the inputs
Initial speed = 100 km/h; Friction coefficient = 0.35; Caliper clamp force = 4,000 N; Effective rotor radius = 0.12 m; Vehicle mass = 1,500 kg
- 2
Apply the formula
d = v²/(2×μ×g); T = μ×F×r; Q = ½mv²
- 3
Result
Stopping distance = 112.36 m
Frequently asked questions
Symbols and assumptions
- speed
- Initial speed (km/h)
- frictionCoeff
- Friction coefficient
- clampForce
- Caliper clamp force (N)
- rotorRadius
- Effective rotor radius (m)
- vehicleMass
- Vehicle mass (kg)
- • Standard textbook geometry and steady operating conditions are assumed; shock, misalignment and wear factors are not applied automatically.
- • Material and surface-finish allowances must be chosen by the user for their actual component.
Sources and review
Reviewed 2026-09-22 · Next review 2027-09-22
- • This is an educational estimate for learning and checking, not a design deliverable.
- • Real design must follow the governing code or standard for your jurisdiction and be reviewed and signed off by a qualified engineer.
- • Safety factors, load combinations and material certification are the responsibility of the designer, not of this page.
Important limitation
This is an educational estimate based only on the values and formula shown. Verify current rates, rules, units, and professional standards before relying on the result. It is not personalized financial or investment advice.
Report a mistake or request an improvement
Tell us if a formula, unit, explanation, or result needs attention. Your message will include this calculator’s name and page.
Related calculators
Drum Brake Leading/Trailing Shoe Force Calculator
Estimate the actuating force for self-energizing leading and trailing shoes on a drum brake.
Ball Bearing L10 Life Calculator
Estimate the L10 fatigue life in millions of revolutions for a ball bearing under load.
Belleville Disc Spring Stack Calculator
Estimate force and deflection for a stack of Belleville disc springs in parallel or series.
Bevel Gear Pitch Cone Angle & Thrust Force Calculator
Determine the pitch cone angle of a bevel gear pair and the resulting axial thrust force.
Cone Clutch Torque Capacity Calculator
Determine the torque capacity and required axial engagement force of a cone clutch.
Flywheel Kinetic Energy & Fluctuation Calculator
Determine kinetic energy storage of a flywheel and its coefficient of speed fluctuation.