Mechanical & Civil Engineering
Hooke's Law – Young's Modulus Calculator
Calculate stress, strain and Young's modulus for a material under axial load using Hooke's law.
Your inputs
Change any value to update the result instantly.
Young's modulus
50,000 MPa
Stress
50 MPa
Strain
0.001
Elongation
0.5 mm
What this calculator does
Hooke's Law – Young's Modulus Calculator: Applies the standard mechanics-of-materials relationship for this load case so a student can see how the stress, strain or deflection follows from the geometry and the load.
What your result means
The headline figure tells you how hard the material is being worked, or how much it moves, under the load you entered. Compare it with the allowable value for your material and required factor of safety.
Formula and working
E = stress / strain = (F/A) / (ΔL/L)
- 1
Collect the inputs
Applied force = 5,000 N; Cross-section area = 100 mm²; Original length = 500 mm; Elongation = 0.5 mm
- 2
Apply the formula
E = stress / strain = (F/A) / (ΔL/L)
- 3
Result
Young's modulus = 50,000 MPa
Frequently asked questions
Symbols and assumptions
- force
- Applied force (N)
- area
- Cross-section area (mm²)
- length
- Original length (mm)
- deltaL
- Elongation (mm)
- • The material is homogeneous, isotropic and loaded within its linear-elastic range.
- • Inputs are entered in a consistent unit system, as labelled on each field.
Sources and review
Reviewed 2026-09-22 · Next review 2027-09-22
- • This is an educational estimate for learning and checking, not a design deliverable.
- • Real design must follow the governing code or standard for your jurisdiction and be reviewed and signed off by a qualified engineer.
- • Safety factors, load combinations and material certification are the responsibility of the designer, not of this page.
Important limitation
This is an educational estimate based only on the values and formula shown. Verify current rates, rules, units, and professional standards before relying on the result. It is not personalized financial or investment advice.
Report a mistake or request an improvement
Tell us if a formula, unit, explanation, or result needs attention. Your message will include this calculator’s name and page.
Related calculators
Poisson's Ratio Calculator
Determine Poisson's ratio from lateral and axial strain measurements.
Shear Modulus Calculator
Compute shear modulus G from Young's modulus E and Poisson's ratio v.
Area Moment of Inertia (Parallel Axis) Calculator
Calculate the moment of inertia about a shifted axis using the parallel axis theorem.
Beam Section Modulus Calculator
Compute the elastic section modulus Z = I/y for a beam cross-section.
Curved Beam Circumferential Fibre Stress Calculator
Calculate circumferential fibre stress in a curved beam using the Winkler-Bach theory.
Fatigue Endurance Limit (S-N Marin Factors) Calculator
Estimate the corrected endurance limit of a material using Marin surface, size, and load factors.