Science & Environment
Water Salinity TDS to Electrical Conductivity Calculator
Convert total dissolved solids (TDS) to electrical conductivity (EC) using a conversion factor.
Your inputs
Change any value to update the result instantly.
Electrical conductivity
781.3 µS/cm
EC in mS/cm
0.781 mS/cm
TDS input
500 mg/L
Conversion factor
0.64
Formula and working
EC (µS/cm) = TDS (mg/L) ÷ factor
- 1
Collect the inputs
Total dissolved solids = 500 mg/L; Conversion factor = 0.64
- 2
Apply the formula
EC (µS/cm) = TDS (mg/L) ÷ factor
- 3
Result
Electrical conductivity = 781.3 µS/cm
Frequently asked questions
Important limitation
This is an educational estimate based only on the values and formula shown. Verify current rates, rules, units, and professional standards before relying on the result. It is not personalized financial or investment advice.
Report a mistake or request an improvement
Tell us if a formula, unit, explanation, or result needs attention. Your message will include this calculator’s name and page.
Related calculators
Water Hardness GPG / mg/L CaCO3 & Softener Salt Calculator
Convert water hardness between grains per gallon and mg/L CaCO3, and estimate softener salt use.
Chemical Oxygen Demand (COD) Industrial Effluent Calculator
Estimate COD load and removal efficiency for industrial wastewater effluent.
Chlorine Contact Time CT Value Disinfection Calculator
Calculate the CT value used to evaluate chlorine disinfection performance in water treatment.
Greywater Recycling Daily Volume Calculator
Estimate daily greywater production and how many toilet flushes it can offset.
Rainwater Harvesting Tank Volume Calculator
Estimate harvestable rainwater volume from roof catchment area, rainfall and runoff efficiency.
Reverse Osmosis Permeate Recovery Rate Calculator
Calculate the permeate recovery rate and concentrate flow of a reverse osmosis system.