Mechanical & Civil Engineering
Roller Bearing Equivalent Dynamic Load Calculator
Compute the equivalent dynamic radial load for a roller bearing under combined radial and axial loads.
Your inputs
Change any value to update the result instantly.
Equivalent dynamic load
1,870 N
Radial contribution
1,120 N
Axial contribution
750 N
Ratio to pure radial
0.935
What this calculator does
Roller Bearing Equivalent Dynamic Load Calculator: Applies the standard machine-element relationship used in design textbooks so the capacity, rating or geometry can be worked out step by step.
What your result means
The headline figure is the capacity, rating or geometric result for the element you described. Compare it with the manufacturer's rating and your required service factor.
Formula and working
P = X×Fr + Y×Fa
- 1
Collect the inputs
Radial load (Fr) = 2,000 N; Axial load (Fa) = 500 N; Radial load factor (X) = 0.56; Axial load factor (Y) = 1.5
- 2
Apply the formula
P = X×Fr + Y×Fa
- 3
Result
Equivalent dynamic load = 1,870 N
Frequently asked questions
Symbols and assumptions
- radialLoad
- Radial load (Fr) (N)
- axialLoad
- Axial load (Fa) (N)
- xFactor
- Radial load factor (X)
- yFactor
- Axial load factor (Y)
- • Standard textbook geometry and steady operating conditions are assumed; shock, misalignment and wear factors are not applied automatically.
- • Material and surface-finish allowances must be chosen by the user for their actual component.
Sources and review
Reviewed 2026-09-22 · Next review 2027-09-22
- • This is an educational estimate for learning and checking, not a design deliverable.
- • Real design must follow the governing code or standard for your jurisdiction and be reviewed and signed off by a qualified engineer.
- • Safety factors, load combinations and material certification are the responsibility of the designer, not of this page.
Important limitation
This is an educational estimate based only on the values and formula shown. Verify current rates, rules, units, and professional standards before relying on the result. It is not personalized financial or investment advice.
Report a mistake or request an improvement
Tell us if a formula, unit, explanation, or result needs attention. Your message will include this calculator’s name and page.
Related calculators
Ball Bearing L10 Life Calculator
Estimate the L10 fatigue life in millions of revolutions for a ball bearing under load.
Journal Bearing Sommerfeld Number Calculator
Calculate the Sommerfeld number for a hydrodynamic journal bearing to assess lubrication regime.
Belleville Disc Spring Stack Calculator
Estimate force and deflection for a stack of Belleville disc springs in parallel or series.
Bevel Gear Pitch Cone Angle & Thrust Force Calculator
Determine the pitch cone angle of a bevel gear pair and the resulting axial thrust force.
Cone Clutch Torque Capacity Calculator
Determine the torque capacity and required axial engagement force of a cone clutch.
Disc Brake Stopping Distance & Heat Calculator
Calculate stopping distance, braking torque and heat dissipated by a disc brake during a stop.